Sterilizer "Ferroplast" - 20

Medical sterilizer "Ferroplast" is intended for thermal airborne sterilization of medical and manicure instruments, glass dishes and other cosmetic accessories heat-resistant up to 200 °C. The sterilizer provides for operation modes for disinfection and drying of cosmetological instruments and thermally-resistant accessories.
Medical sterilizer "Ferroplast" - 20 is intended for thermal airborne sterilization of medical and manicure instruments, glass dishes and other cosmetic accessories heat-resistant up to 200 °C. The sterilizer provides for operation modes for disinfection and drying of manicure instruments and thermally-resistant accessories.

The main distinctive features of Ferroplast sterilizers from analogs:
increased performance
model compactness
lightweight version
reduction of warm-up and cooling time
50% increase in surface for the instruments to be sterilized

The sterilization chamber is developed by computer simulation to achieve maximum air injection providing for placing the instruments in the sterilization chamber on 5 shelves at the same time.

Registration Certificate No. РЗН 2020/9657 of 14.02.2020.
"Ferroplast" sterilizer operates from 220±10% V AC voltage, frequency 50 Hz. The socket shall have a grounding contact.

Main Data:
Power consumption - 1.5 kW;
Operating voltage 220 V, frequency 50 Hz;
Overall dimensions, (WхDхH) 400х425х485±5 mm;
Weight (as a complete package) - no more than 13 kg;
Time to reach 180 °С mode, no more than 35 minutes;
The useful internal volume of the sterilization chamber is 20,000 ml.
The noise generated by the sterilizer is no more than 65 dBA.

"Ferroplast" sterilize with the sterilization chamber loaded shall provide for automatic maintenance of temperature conditions in the range from + 85 °С to + 180 °С and the sterilization and disinfection holding time, as well as a user-programmable mode + 50 °С to + 200 °С, with an interval of 1 to 999 minutes. The mode data shall correspond to the parameters shown in table 1.

Table 1.

Mode Temperature, °С* Exposure time, min. ** Sterilization 180 60 160 150 Disinfection 120 45 Drying 85 45 Own mode 50-200 1-999 Note:
*-Permissible deviation ± 3 °С
**-Permissible deviation ±5 %.

"Ferroplast" sterilizer provides for the operation modes sound and light indication system:

- sound and light indication of operation stages;

- digital indication of set and current values of the modes allowing for controlling the temperature in the sterilization chamber with a resolution of no more than 1 °C and time discreteness of no more than 1 minute

"Ferroplast" sterilizer meets the requirements of TR CU 004/2011 "On safety of low-voltage equipment" and TR CU 020/2011 "Electromagnetic compatibility of technical equipment".

Mean time between failures is no less than 1000 hours.

The sterilizer continuous operation in operating mode is no less than 16 hours with mandatory break of 8 hours.

Average service life is 5 years.

The outer surfaces of the sterilizer allow for disinfection as per MU-287-113, when using disinfectants with addition of 0.5% detergent such as "Lotus", "Astra", etc.

The sterilizer shall be operated in premises with a range of ambient temperatures from + 10 °C to + 35 °C; relative humidity up to 80% at temperature of + 25 °C, atmospheric pressure of (84-107 kPa) 630-800 mm Hg.
      © LLC Ferroplast Medical, 2020
      Our Company in social networks
      Contact us
      Product
      +